Tadco M Series

Two Component Polyurethane Cast Elastomer Systems

Shore A50 - A98 Hardness

Components : Polyether Polyol Mixture and Polyether or Polyester / MDI
                           Quasi-Prepolymer Isocyanate.

Applications : Semi-dynamic and Non-dynamic Applications where better 
                           Tensile Strength, Elongation and Tear Resistance than 
                           L-Series are required.
                           Toys, computer parts, gaskets ...

Advantages

  • Mid-range Cost
  • Low Viscosity
  • Room Temperature Processing
  • Good Tensile and Tear Properties
  • Variety of Gel Times
  • Variety of Colors

Considerations

  • Medium Rebound
TADCO
SYSTEM		 HARDNESS
SHORE A		 TENSILE STRENGTH
psi		 TENSILE
ELONGATION
%		 DIE-C TEAR
pli		 SPLIT TEAR
pli		 REBOUND
%
M 150 A50 1000 850 190 55 55
M 160 A60 1130 750 260 70 50
M 170 A70 3600 1100 380 140 60
M 175 A75 2800 1000 330 130 50
M 180 A82 2500 650 420 200 60
M 185 A85 3700 750 420 145 65
M 190 A88 4200 1000 460 240 55
M 265 A67 2600 630 235 90 50
M 290 A90 2900 600 460 260 50
M 295 A95 4300 490 630 290 50
M 298 A98 4500 800 550 300 45

Properties listed are typical and can not be used as a reference.